CADSoftTools.com

by **Peter** » 15 Jun 2006, 07:52

Hello

I want to view DWT-files (they are identical to DWG) and edited my wincmd.ini, adding the DWT-extension:

Code: Select all: 5=D:\Program Files\totalcmd\plugins\Cadview\CADView.wlx 5_detect="FORCE | EXT="DWG" | EXT="DWT" | EXT="DXF" | EXT="PLT" | EXT="HGL" | EXT="RTL" | EXT="HG" | EXT="PLO" | EXT="HP" | EXT="HPG" | EXT="HPGL" | EXT="PRN" | EXT="HP2" | EXT="SVG" | EXT="CGM""

But I have no success - DWTs are shown only with binary code, but not as a drawing.

How to view DWTs?

Peter

by **support** » 16 Jun 2006, 16:32

Hello Peter!

Thank you for the interesting remark. We will take it into account and inform about results.

Sergey.

please post questions to the forum or write to support@cadsofttools.com

by **Peter** » 25 Jun 2006, 18:05

hello

something new? Maybe a schedule for a new release?

Peter

by **support** » 27 Jun 2006, 14:14

Dear Peter,

The question is not so simple as it could seem first. Of course, we can add support of DWT file format basing on our DWG libraries but first we need to make necessary researches to study possible problems (exceptions, access violations etc.) And only after some testings the positive decision will be taken.

Sergey.

please post questions to the forum or write to support@cadsofttools.com

by **Peter** » 27 Jun 2006, 20:28

Sergey

I am not a software specialist and I am curious about what the difference is between DWG and DWT. I made a lot of DWGs, renamed them to DWT - and that's it. Same format, some content, ...

Best regards

Peter

by **Peter** » 06 Sep 2006, 16:53

Hello

something new with testing?

Peter

by **support** » 08 Sep 2006, 16:54

Hello Peter!

The problem has been solved. Updated CADView is available on: http://www.cadsofttools.com/download/cadview.zip

Sergey.

please post questions to the forum or write to support@cadsofttools.com

by **Peter** » 08 Sep 2006, 18:00

Hello

it seem to work ..

Peter

by **Peter** » 27 Sep 2006, 11:52

By the way:

The files BAK (not all of them, I know)and SVÂ§ are DWG-files which could be displayed in CadView. All of them has the code "AC10" on beginning of file.

Peter

by **support** » 27 Sep 2006, 12:00

Hello Peter!

Thank you for the information. We will take it into account for the future.

Sergey.

please post questions to the forum or write to support@cadsofttools.com

by **Peter** » 25 May 2007, 16:42

Hello

why the new version does not have this function (viewing of sv$ and bak witg "AC10..")? [:(]

Peter

by **support** » 28 May 2007, 08:34

Hello Peter,

why the new version does not have this function (viewing of sv$ and bak witg "AC10..")?

This problem has not been solved yet because we have no final decision on how support of sv$ and bak files to be implemented.

Sergey.

Please post questions to the forum or write to support@cadsofttools.com

by **Peter** » 12 May 2008, 08:41

support wrote:Hello Peter,
This problem has not been solved yet because we have no final decision on how support of sv$ and bak files to be implemented. ...

Something new?

Peter

by **support** » 12 May 2008, 13:20

Hello Peter,

This question is in a discussion state till now. We will keep you informed.

Sergey.

by **Peter** » 24 Apr 2009, 14:08

Seem to be fixed in Version 7, but not listed in "Change.txt/History.txt".

True?

Peter

CADSoftTools.com

Why no viewing of DWT?

Why no viewing of DWT?

Re:

Re: Why no viewing of DWT?

Re: Why no viewing of DWT?

Who is online