Is there a "Pan" mode?

[敏峰.张]

Hello, I am new to CADViewX. Is this ActiveX has a "Pan" mode which the users just need to press the left key of mouse to navigate the drawing.

[support]

Hello,

Yes, there is a Pan mode. To activate it, press and hold the right mouse button.

Mikhail

[敏峰.张]

Can I set left button to active pan mode by ActiveX's parameter?

And I wondering what's the difference of value -1, 0, 1 ?

[support]

And I wondering what's the difference of value -1, 0, 1 ?

Could you please elaborate on this? It is not quite clear what you mean.

Mikhail

[敏峰.张]

What's the meanings for 0, 1, -1, I read CADViewX Lite.chm and have no idea.

Code: Select all

<object id=CADViewX height=408 width=568 classid=clsid:C66533D3-BEAF-4D34-AF8C-DDBCEE1B84CB name=CADViewX  VIEWASTEXT>
	<param NAME="AutoScroll" VALUE="0">
	<param NAME="AutoSize" VALUE="0">
	<param NAME="AxBorderStyle" VALUE="1">
	<param NAME="Caption" VALUE="CADViewX Control">
	<param NAME="Color" VALUE="8421504">
	<param NAME="KeyPreview" VALUE="-1">
	<param NAME="PixelsPerInch" VALUE="96">
	<param NAME="PrintScale" VALUE="1">
	<param NAME="Scaled" VALUE="-1">
	<param NAME="DropTarget" VALUE="0">
	<param NAME="ScreenSnap" VALUE="0">
	<param NAME="SnapBuffer" VALUE="10">
	<param NAME="DoubleBuffered" VALUE="-1">
	<param NAME="Enabled" VALUE="-1">
	<param NAME="ToolBarVisible" VALUE="-1">
	<param NAME="LayoutIndex" VALUE="0">
	<param NAME="LayoutsBarVisible" VALUE="-1">
	<param NAME="SelfPopupMenu" VALUE="-1">
	<param NAME="IsWithoutBorder" VALUE="0">
	<param NAME="Millimetres" VALUE="0">
	<param NAME="UseSHXFonts" VALUE="-1">
	<param NAME="SearchSHXPaths" VALUE="-1">
	<param NAME="DefaultSHXPath" VALUE="">
	<param NAME="DefaultSHXFont" VALUE="txt.shx">
	<param NAME="SHXSearchPaths" VALUE="">
	<param NAME="BackGroundColor" VALUE="16777215">
	<param NAME="FileName" VALUE="www.cadsofttools.com/dwgviewer/gasket.dwg">
	<param NAME="DrawMode" VALUE="0">
	<param NAME="DefaultColor" VALUE="0">
	<param NAME="PrinterIndex" VALUE="1">
	<param NAME="PaperOrientation" VALUE="1">
	<param NAME="BorderWidth" VALUE="0">
	<param NAME="VisibleOrbit3D" VALUE="0">
	<param NAME="RasterColorDepth" VALUE="3">
	<param NAME="ScaleFactor" VALUE="1">
	<param NAME="ImageAlign" VALUE="5">
	<param NAME="Language" VALUE="English">
	<param NAME="PrintViewArea" VALUE="0">
	<param NAME="IsShowPrinterSetupDialog" VALUE="0">
	<param NAME="HScrollBarVisible" VALUE="0">
	<param NAME="VScrollBarVisible" VALUE="0">
	<param NAME="Font" VALUE="MS Sans Serif">
	<param NAME="Visible" VALUE="0">
	<param NAME="PrintingTitle" VALUE="CADViewX printing">
	</object>

[support]

What's the meanings for 0, 1, -1, I read CADViewX Lite.chm and have no idea.

Code: Select all

<object id=CADViewX height=408 width=568 classid=clsid:C66533D3-BEAF-4D34-AF8C-DDBCEE1B84CB name=CADViewX  VIEWASTEXT>
	<param NAME="AutoScroll" VALUE="0">
	<param NAME="AutoSize" VALUE="0">
	<param NAME="AxBorderStyle" VALUE="1">
	<param NAME="Caption" VALUE="CADViewX Control">
	<param NAME="Color" VALUE="8421504">
	<param NAME="KeyPreview" VALUE="-1">
	<param NAME="PixelsPerInch" VALUE="96">
	<param NAME="PrintScale" VALUE="1">
	<param NAME="Scaled" VALUE="-1">
	<param NAME="DropTarget" VALUE="0">
	<param NAME="ScreenSnap" VALUE="0">
	<param NAME="SnapBuffer" VALUE="10">
	<param NAME="DoubleBuffered" VALUE="-1">
	<param NAME="Enabled" VALUE="-1">
	<param NAME="ToolBarVisible" VALUE="-1">
	<param NAME="LayoutIndex" VALUE="0">
	<param NAME="LayoutsBarVisible" VALUE="-1">
	<param NAME="SelfPopupMenu" VALUE="-1">
	<param NAME="IsWithoutBorder" VALUE="0">
	<param NAME="Millimetres" VALUE="0">
	<param NAME="UseSHXFonts" VALUE="-1">
	<param NAME="SearchSHXPaths" VALUE="-1">
	<param NAME="DefaultSHXPath" VALUE="">
	<param NAME="DefaultSHXFont" VALUE="txt.shx">
	<param NAME="SHXSearchPaths" VALUE="">
	<param NAME="BackGroundColor" VALUE="16777215">
	<param NAME="FileName" VALUE="www.cadsofttools.com/dwgviewer/gasket.dwg">
	<param NAME="DrawMode" VALUE="0">
	<param NAME="DefaultColor" VALUE="0">
	<param NAME="PrinterIndex" VALUE="1">
	<param NAME="PaperOrientation" VALUE="1">
	<param NAME="BorderWidth" VALUE="0">
	<param NAME="VisibleOrbit3D" VALUE="0">
	<param NAME="RasterColorDepth" VALUE="3">
	<param NAME="ScaleFactor" VALUE="1">
	<param NAME="ImageAlign" VALUE="5">
	<param NAME="Language" VALUE="English">
	<param NAME="PrintViewArea" VALUE="0">
	<param NAME="IsShowPrinterSetupDialog" VALUE="0">
	<param NAME="HScrollBarVisible" VALUE="0">
	<param NAME="VScrollBarVisible" VALUE="0">
	<param NAME="Font" VALUE="MS Sans Serif">
	<param NAME="Visible" VALUE="0">
	<param NAME="PrintingTitle" VALUE="CADViewX printing">
	</object>

Could you please tell where you found it?

Mikhail

[敏峰.张]

after installed CADViewX, in folder "C:/Programme Files (x86)/CADSoftTools/CADViewX/Demo/HTML/".

[support]

Hello,

For boolean parameters VALUE="0" means "false", while VALUE="1" or VALUE="-1" means "true".

Mikhail

[敏峰.张]

Hello,

For boolean parameters VALUE="0" means "false", while VALUE="1" or VALUE="-1" means "true".

Mikhail

Noted. Thanks